Contact Seller

SAC F/6

Year: 1988
Condition: Used
Located in Belgium
Ref #: 145933

Product Description

Window machining center
Angular window machining center with automatic return towards the operator
Min/max workpiece length: 280 mm / 2600 mm.
Min/max workpiece width: 20 mm/ 300 mm
Min/max workpiece thickness: 20 mm/ 100 mm

Feedmotor of the tenoning table: 0,75 kW
Feedspeed of the tenoning table: 3 to 20 m/min
Feedmotor in the profiling area: 0,75 kW
Feedspeed in the profiling area: 3 to 20 m/min.
Number and diameter of the feedrollers: 14 / 145 mm.
Hydraulic power pack motor 0,75 kW
Automatic return towards the operator

Equipment:
-Cut-off saw:
Motor 3 kW, 3000 r/min
Spindle diameter 30 mm
Sawblade diameter 400 mm
Horizontal adjustment of the sawblade over 100 mm
Revolver fences for this horizontal positioning: 16
-Tenoning by 2 spindles:
Automatic positioning of both spindles on 4 levels
Power each motor: 11 kW, 3000 r/min
Diameter and length of each spindle: 50 mm / 320 mm.
Vertical stroke of each spindle: 255 mm.
Max. tool diameter: 350 mm.
-Profiling by 4 spindles:
2 programmable profiling spindles with each 3 levels
Motor of each spindle: 7,5 kW, 6000 r/min
Spindle diameter and length: 50 mm / 270 mm.
Vertical stroke of the spindles: 170 mm.
Max. tool diameter: 240 mm.
Vertical saw to make the rebate of the glass-fixing part of the window:
Motor 2,2 kW, 6000 r/min
Sawbladediameter: 200 mm, spindle 30 mm.
Additional spindle make the groove for the hardware:
Motor 3 kW, 6000 r/min
Tooldiameter 160 mm, spindlediameter 30 mm.
Horizontal adjustment over 35 mm

Contact the Seller

For more information or to express interest in this machine,
please fill out this short enquiry form:

*First Name
*Company
*Country
*Telephone
Website
*Email
*Confirm Email
*Message

Product Description

Window machining center
Angular window machining center with automatic return towards the operator
Min/max workpiece length: 280 mm / 2600 mm.
Min/max workpiece width: 20 mm/ 300 mm
Min/max workpiece thickness: 20 mm/ 100 mm

Feedmotor of the tenoning table: 0,75 kW
Feedspeed of the tenoning table: 3 to 20 m/min
Feedmotor in the profiling area: 0,75 kW
Feedspeed in the profiling area: 3 to 20 m/min.
Number and diameter of the feedrollers: 14 / 145 mm.
Hydraulic power pack motor 0,75 kW
Automatic return towards the operator

Equipment:
-Cut-off saw:
Motor 3 kW, 3000 r/min
Spindle diameter 30 mm
Sawblade diameter 400 mm
Horizontal adjustment of the sawblade over 100 mm
Revolver fences for this horizontal positioning: 16
-Tenoning by 2 spindles:
Automatic positioning of both spindles on 4 levels
Power each motor: 11 kW, 3000 r/min
Diameter and length of each spindle: 50 mm / 320 mm.
Vertical stroke of each spindle: 255 mm.
Max. tool diameter: 350 mm.
-Profiling by 4 spindles:
2 programmable profiling spindles with each 3 levels
Motor of each spindle: 7,5 kW, 6000 r/min
Spindle diameter and length: 50 mm / 270 mm.
Vertical stroke of the spindles: 170 mm.
Max. tool diameter: 240 mm.
Vertical saw to make the rebate of the glass-fixing part of the window:
Motor 2,2 kW, 6000 r/min
Sawbladediameter: 200 mm, spindle 30 mm.
Additional spindle make the groove for the hardware:
Motor 3 kW, 6000 r/min
Tooldiameter 160 mm, spindlediameter 30 mm.
Horizontal adjustment over 35 mm

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.


Join Our
Mailing List!