Product Description
DUAL SHAFT SHREDDER HYDRAULIC
Description:
CASE
Constructed in sturdy steel
Incuding structure and loading hopper.
Shearing surface LxW mm.1300×1100
N.2 counterrotating shafts
working shafts length mm.1.300
rotational speed 13/17 rpm
n.13 conter rotating knives (easy replacement)
knife-thickness 100 mm.
n.2 hooks per knife sector
n.13 spacers
n.13 spacer combs
n.13 knife combs
n.2 front protections for transmission parts
n.2 Linde axial piston, hydraulic motors (variable power)
n.2 planetary gearboxesOLEODYNAMIC PLANT
n.2 Linde oleodynamic , axial piston pumps
n.2 Regulators of constant power HPV 165
N.1 Auxiliary outer cooling circuit RIF 2030-2KS Air/Oil – 40.000 Kcal/h
N.2 cooling vents
N.1 out-line filtering circuit
N.1x 1000 lt.oil tank
N.2 outer working pressure controls
N.1 outer closed-circuit pump feeding pressure control
2 level temperature controllers
safety device for clogged filters
safety device for minimum oil level in the tank
Analog pressure transducer for checking and setting the calibration values of the pressure
Electrical safety of minimum oil level in the tank
Analog pressure transducer for checking and setting the pressure calibration values
Safety pressure switches and overload reversal cycle control
ELECTRIC POWER SYSTEM
n 2 x 75 Kw Electric control motor 380V /50Hz 4 Poles (Possible 2×90 Kw drives)
n.1 x 4 kw Auxiliary electric motor for out-line filtering 380V/50Hz 4 Poles
n.2×195 kw Electric motor for oil cooling fans 230-400 V / 50 Hz 2 Poles
ELECTRONIC CONTROL SYSTEM
PLC Control of the Functions
Control touch screen for setting the working parameters
Monitor for reading the set working parameters in clear text and checking the functions operating conditions (check-control)
Automatic electro-hydraulic control of the inversion system of the shafts in conditions of overload
WEIGHT OF THE ROTATING SHEAR Kg 14.000
ADDITIONAL EQUIPMENT ON REQUEST (not included in the estimate)
extraction belt
loading belt
remote control
spare knives
Average throughput rate 1,3-2,8 Tons/h depending on drive, on materials and on knives conditions.
This DUAL SHAFT SHREDDER specifically studied for woven PP, Big Bags and such.
We all know how this woven PP can be a tough challenge for many machines. Shredding these materials is warmly suggested before processing in a standard agglomerator, in order to avoid an excessive effort of the machine and sooner knives wearing.
Compared to a guillotine, the dual shaft shredder does not need an operator constantly on the machine, which can be loaded and unloaded to feed the next process, being it a washing line or an agglomerator.
Our machines are constructed following Italian quality standards as for materials used, components, manufacture and care for details. Our 30 years experience is the key to grant excellent results with different waste materials.
The sturdy structure, the easy knife-replacement system, the possibility to fit the machine with bespoken drives makes our dual shaft shredder a reliable partner when coming to size reduction.
Product Description
DUAL SHAFT SHREDDER HYDRAULIC
Description:
CASE
Constructed in sturdy steel
Incuding structure and loading hopper.
Shearing surface LxW mm.1300×1100
N.2 counterrotating shafts
working shafts length mm.1.300
rotational speed 13/17 rpm
n.13 conter rotating knives (easy replacement)
knife-thickness 100 mm.
n.2 hooks per knife sector
n.13 spacers
n.13 spacer combs
n.13 knife combs
n.2 front protections for transmission parts
n.2 Linde axial piston, hydraulic motors (variable power)
n.2 planetary gearboxesOLEODYNAMIC PLANT
n.2 Linde oleodynamic , axial piston pumps
n.2 Regulators of constant power HPV 165
N.1 Auxiliary outer cooling circuit RIF 2030-2KS Air/Oil – 40.000 Kcal/h
N.2 cooling vents
N.1 out-line filtering circuit
N.1x 1000 lt.oil tank
N.2 outer working pressure controls
N.1 outer closed-circuit pump feeding pressure control
2 level temperature controllers
safety device for clogged filters
safety device for minimum oil level in the tank
Analog pressure transducer for checking and setting the calibration values of the pressure
Electrical safety of minimum oil level in the tank
Analog pressure transducer for checking and setting the pressure calibration values
Safety pressure switches and overload reversal cycle control
ELECTRIC POWER SYSTEM
n 2 x 75 Kw Electric control motor 380V /50Hz 4 Poles (Possible 2×90 Kw drives)
n.1 x 4 kw Auxiliary electric motor for out-line filtering 380V/50Hz 4 Poles
n.2×195 kw Electric motor for oil cooling fans 230-400 V / 50 Hz 2 Poles
ELECTRONIC CONTROL SYSTEM
PLC Control of the Functions
Control touch screen for setting the working parameters
Monitor for reading the set working parameters in clear text and checking the functions operating conditions (check-control)
Automatic electro-hydraulic control of the inversion system of the shafts in conditions of overload
WEIGHT OF THE ROTATING SHEAR Kg 14.000
ADDITIONAL EQUIPMENT ON REQUEST (not included in the estimate)
extraction belt
loading belt
remote control
spare knives
Average throughput rate 1,3-2,8 Tons/h depending on drive, on materials and on knives conditions.
This DUAL SHAFT SHREDDER specifically studied for woven PP, Big Bags and such.
We all know how this woven PP can be a tough challenge for many machines. Shredding these materials is warmly suggested before processing in a standard agglomerator, in order to avoid an excessive effort of the machine and sooner knives wearing.
Compared to a guillotine, the dual shaft shredder does not need an operator constantly on the machine, which can be loaded and unloaded to feed the next process, being it a washing line or an agglomerator.
Our machines are constructed following Italian quality standards as for materials used, components, manufacture and care for details. Our 30 years experience is the key to grant excellent results with different waste materials.
The sturdy structure, the easy knife-replacement system, the possibility to fit the machine with bespoken drives makes our dual shaft shredder a reliable partner when coming to size reduction.