Contact Seller

GERMANPLAST WASHING DRYING LINE FOR HDPE

Year: 2021
Condition: New
Located in Italy
Ref #: 145145

Product Description

WASHING DRYING LINE FOR HDPE

Reground from PPL BIG BAGS in 60×60 mm flakes, freed from any stones and metals
Approximate throughput rate 1.500 kg/h depending on thickness and contamination degree.
Overall contamination should not exceed 15% in weight
All stainless sell used in the line is Aisi304.
Electricity : 400V 50 Hz 3 Phase
Including:
FEEDING/DOSING UNIT with feeding augers to the washer, made in stainless steel
WASHING MACHINE, made in stainless steel, with paddles, rotating at high speed to remove solid contamination through a 3 mm diam. perforated cage before entering the sink-float separation bath.
SINK-FLOAT TANK + draining extraction auger, made in stainless steel. It receives the pre-washed PPL flakes which will float, being separated from heavier contamination, moved by a stirring device. Material is conveyed through a draining auger
From top, while waste, sank contamination is extracted from bottom. Catwalk, railing and ladder.
CENTRIFUGE+ BLOWER + CYCLON: material is partially dried through a spinning centrifuge, made in stainless steel, with interchangeable stainless steel paddles, mounted on water cooled bearings, automatically grease-lubricated. The decagonal
Cage is externally rinsed by water spraying, automatically driven.Complete with fan, blower and cyclon
CONTROL PANEL with Siemens PLC, SIMATIC touch screen, Siemens components.
Electric Power: installed about 130 kw – used in work about 90 kw.
Compressed air (8 bar) 100 lt/h (free air)
Water recirculation approx. 5/10 m3/h
Water consume approx 0,5/1 m3/h
Water must always be kept clean and all circulating water must be fresh or coming from a water treatment plant having having the following values: Hardness 8-10°F pH 7-8
Residual moisture after centrifuge : 10-13%
This offer does not include a water treatment system.
User’s manual, drawings, CE compliance

Contact the Seller

For more information or to express interest in this machine,
please fill out this short enquiry form:

*First Name
*Company
*Country
*Telephone
Website
*Email
*Confirm Email
*Message

Product Description

WASHING DRYING LINE FOR HDPE

Reground from PPL BIG BAGS in 60×60 mm flakes, freed from any stones and metals
Approximate throughput rate 1.500 kg/h depending on thickness and contamination degree.
Overall contamination should not exceed 15% in weight
All stainless sell used in the line is Aisi304.
Electricity : 400V 50 Hz 3 Phase
Including:
FEEDING/DOSING UNIT with feeding augers to the washer, made in stainless steel
WASHING MACHINE, made in stainless steel, with paddles, rotating at high speed to remove solid contamination through a 3 mm diam. perforated cage before entering the sink-float separation bath.
SINK-FLOAT TANK + draining extraction auger, made in stainless steel. It receives the pre-washed PPL flakes which will float, being separated from heavier contamination, moved by a stirring device. Material is conveyed through a draining auger
From top, while waste, sank contamination is extracted from bottom. Catwalk, railing and ladder.
CENTRIFUGE+ BLOWER + CYCLON: material is partially dried through a spinning centrifuge, made in stainless steel, with interchangeable stainless steel paddles, mounted on water cooled bearings, automatically grease-lubricated. The decagonal
Cage is externally rinsed by water spraying, automatically driven.Complete with fan, blower and cyclon
CONTROL PANEL with Siemens PLC, SIMATIC touch screen, Siemens components.
Electric Power: installed about 130 kw – used in work about 90 kw.
Compressed air (8 bar) 100 lt/h (free air)
Water recirculation approx. 5/10 m3/h
Water consume approx 0,5/1 m3/h
Water must always be kept clean and all circulating water must be fresh or coming from a water treatment plant having having the following values: Hardness 8-10°F pH 7-8
Residual moisture after centrifuge : 10-13%
This offer does not include a water treatment system.
User’s manual, drawings, CE compliance

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.


Join Our
Mailing List!