Contact Seller

GERMANPLAST >2.000 kg/h

Year: 2005
Condition: Used
Located in Italy
Ref #: 113655

Product Description

  • AUTOMATIC TWIN SCREW WASTE MATERIAL PROCESSOR
  • dries
  • degasses
  • compacts
  • fully automatic
  • low maintenance costs
  • sturdy structure, made for 24/7 work
  • 260 kw average consumed
  • 2000 kg average produced.
  • totally reconditioned in a "state of the art " manner

Sturdy steel  4 m3  storage  bunker mm.1.004x3.000x1.400.  
Infed material  can be moist from a washing line and  in size about 100x100 mm (film). Material size must be inversely proportional to thickness.
Moisture will affect production very much, since water is lost during process.  Just as a reference,  with up to 20% moisture you can get 1.500/2.000 kg output.
Feeding is done by 2 augers diam.400 mm. which will transport material to the  shaking board
Shaking board to regulate and  uniform material flow to the screws
material is then dropped onto the segmented screws, 600 mm.diam. where it is thoroughly blended.  Heating comes  just out of friction. During the process,  all moisture and gasses are let out and  exhausted through a vacuum hood.
Main engine is a 400 kw, 6 poles  3Ph 440 V 50 Hz. In work, the processor uses 65% of power
gearbox 
inverter to adjust speed of  feeding augers and  processing screws.
multi-hole  matrix  with adjustable flow,  according to materials
Siemens PLC, touch screen control board to adjust parameters  to the different materials
Total dimensions of the processor apprx: WxLxH 5100x2500x3410 mm.
output material is a constant, blended  flow which needs to be cooled and reground. Final aspect is as per videos  https://www.germanplast.eu/prodotto/waste-material-automatic-processor/
The line will be customized according to your needs and materials processed. Upstream and downstream equipment will be supplied where necessary.This waste processing line is designed to operate under heavy loads, so all components are manufactured for strength and sturdiness. Usually these lines work on a 24/7 schedule.All components are made in Italy or Germany with the highest quality standards.Operating forces are well balanced, and the main drive motor is generously oversized in order to maintain the production rates even in the presence of more difficult materials. Under normal conditions, the motor runs at only about 65% of its maximum capacity (260 kw).The line runs automatically so no need for operators.Among the materials which can be processed we can list : PE PP FILM and  WOVEN from washing line - PULPER from Paper mills - POLYLAMINATED FILMS- PS, - Mixed plastics from domestic collection - organic materials for peat substitute - hospital plastic waste, etc.

Ask for videos and more photos

 

Thank you for visiting our website. Unfortunately, this machine is no longer available however, please find a selection of machines for sale below; which may be of interest to you.

  • GERMANPLAST 650 mm.

    GRINDING MILL 650 mm infeed : 800×500 mm side  feeding for pipes 300×250 mm. a.c.motor 37 kw semi open rotor 650 mm long n.3 roto...

  • GERMANPLAST 650 kg/h

    PREALPINA COMPLETE GRINDING/WASHING /DRYING PLANT For PE PP scraps from Agricolture and MHW Scraps Average output 500/700 kg/h depending on Scra...

  • TPA  COMPLETE TIRE RECYCLING LINE 2500 kg/h

    TPA COMPLETE TIRE RECYCLING PLANT Average output 2500 kg/h depending on % truck and car tires Production of granulate 0-2 mm and 2-4 mm. Shredder used for s...

Product Description

  • AUTOMATIC TWIN SCREW WASTE MATERIAL PROCESSOR
  • dries
  • degasses
  • compacts
  • fully automatic
  • low maintenance costs
  • sturdy structure, made for 24/7 work
  • 260 kw average consumed
  • 2000 kg average produced.
  • totally reconditioned in a "state of the art " manner

Sturdy steel  4 m3  storage  bunker mm.1.004x3.000x1.400.  
Infed material  can be moist from a washing line and  in size about 100x100 mm (film). Material size must be inversely proportional to thickness.
Moisture will affect production very much, since water is lost during process.  Just as a reference,  with up to 20% moisture you can get 1.500/2.000 kg output.
Feeding is done by 2 augers diam.400 mm. which will transport material to the  shaking board
Shaking board to regulate and  uniform material flow to the screws
material is then dropped onto the segmented screws, 600 mm.diam. where it is thoroughly blended.  Heating comes  just out of friction. During the process,  all moisture and gasses are let out and  exhausted through a vacuum hood.
Main engine is a 400 kw, 6 poles  3Ph 440 V 50 Hz. In work, the processor uses 65% of power
gearbox 
inverter to adjust speed of  feeding augers and  processing screws.
multi-hole  matrix  with adjustable flow,  according to materials
Siemens PLC, touch screen control board to adjust parameters  to the different materials
Total dimensions of the processor apprx: WxLxH 5100x2500x3410 mm.
output material is a constant, blended  flow which needs to be cooled and reground. Final aspect is as per videos  https://www.germanplast.eu/prodotto/waste-material-automatic-processor/
The line will be customized according to your needs and materials processed. Upstream and downstream equipment will be supplied where necessary.This waste processing line is designed to operate under heavy loads, so all components are manufactured for strength and sturdiness. Usually these lines work on a 24/7 schedule.All components are made in Italy or Germany with the highest quality standards.Operating forces are well balanced, and the main drive motor is generously oversized in order to maintain the production rates even in the presence of more difficult materials. Under normal conditions, the motor runs at only about 65% of its maximum capacity (260 kw).The line runs automatically so no need for operators.Among the materials which can be processed we can list : PE PP FILM and  WOVEN from washing line - PULPER from Paper mills - POLYLAMINATED FILMS- PS, - Mixed plastics from domestic collection - organic materials for peat substitute - hospital plastic waste, etc.

Ask for videos and more photos

 

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.


Join Our
Mailing List!