Contact Seller

Water Deaeration Plant Alfa Laval 150 hl/h

Year: 2006
Condition: Used
Located in Finland
Ref #: 143971

Product Description

Water Deaeration Plant ALDOX-P 150 HL with Pasteurization

 

Hot deaeration plant ALDOX-P 150 HLwas made by Alfa Laval in year 2006 and it is designed for produce air free, deaerated water for brewing.  ALDOX Plant is fully automatic, self-contained, ready for operation and it has on built CIP nozzles for automatic cleaning. This deaeration technology results in exceptionally efficient oxygen removal, with very low gas consumption. Water is also pasteurized at 72 °C during the process and do not need pasteurization afterwards. During oxygen removal 95% or more of the stripping gas entering the column is dissolved into the water, which reduces the need for additional carbonation of products for production of such as high-gravity blended beer. The high desorption of oxygen is achieved by using carbon dioxide or nitrogen oxide as the stripping gas over a packed bed, at atmospheric pressure. Water is routed via the liquid distributor to the top of the column and travels downward countercurrent with the CO2 / N2 . ALDOX systems enable you to keep oxygen levels down to as little as 0,02 ppm

 

Technical specifications:

Manufacturer                                      Alfa Laval

Manufacturer year                             2006

Type                                                   ALDOX – P 150 HL

Capacity                                             1 – 1h0 hl/h

Residual oxygen content                   max 0,02 ppm

Inlet water temperature                      8 – 15 °C

Pasteurization temperature                72 °C

Water outlet temperature                   2 °C

Cooling media                                   Prop. Glycol 25%

Heating media                                    Steam, 3 bar saturated

Electric power                                    15 kW / 3x400V / 50 Hz 

Control PLC                                      Siemens Simatic S7

Main dimensions                               300 x 250 x 460 cm (L x W x H)                                      

Approximate weight                          2.300 kg

 

List of main equipment:

ALDOX-P Deaeration Module
Stripping Column, AISI 304
Plate Heat Exchanger FRONT LINE 8-RM, 3 sections, AISI 316
Balance Tank BTD-350, AISI 304
Sanitary Centrifugal Pump LKH, frequency-controlled speed
Centrifugal Pump LKH for cooling media
Control Paned with Siemens C7 PLC and TP 270 operator interface
Set of valves, process indicators and piping

Contact the Seller

For more information or to express interest in this machine,
please fill out this short enquiry form:

*First Name
*Company
*Country
*Telephone
Website
*Email
*Confirm Email
*Message

Product Description

Water Deaeration Plant ALDOX-P 150 HL with Pasteurization

 

Hot deaeration plant ALDOX-P 150 HLwas made by Alfa Laval in year 2006 and it is designed for produce air free, deaerated water for brewing.  ALDOX Plant is fully automatic, self-contained, ready for operation and it has on built CIP nozzles for automatic cleaning. This deaeration technology results in exceptionally efficient oxygen removal, with very low gas consumption. Water is also pasteurized at 72 °C during the process and do not need pasteurization afterwards. During oxygen removal 95% or more of the stripping gas entering the column is dissolved into the water, which reduces the need for additional carbonation of products for production of such as high-gravity blended beer. The high desorption of oxygen is achieved by using carbon dioxide or nitrogen oxide as the stripping gas over a packed bed, at atmospheric pressure. Water is routed via the liquid distributor to the top of the column and travels downward countercurrent with the CO2 / N2 . ALDOX systems enable you to keep oxygen levels down to as little as 0,02 ppm

 

Technical specifications:

Manufacturer                                      Alfa Laval

Manufacturer year                             2006

Type                                                   ALDOX – P 150 HL

Capacity                                             1 – 1h0 hl/h

Residual oxygen content                   max 0,02 ppm

Inlet water temperature                      8 – 15 °C

Pasteurization temperature                72 °C

Water outlet temperature                   2 °C

Cooling media                                   Prop. Glycol 25%

Heating media                                    Steam, 3 bar saturated

Electric power                                    15 kW / 3x400V / 50 Hz 

Control PLC                                      Siemens Simatic S7

Main dimensions                               300 x 250 x 460 cm (L x W x H)                                      

Approximate weight                          2.300 kg

 

List of main equipment:

ALDOX-P Deaeration Module
Stripping Column, AISI 304
Plate Heat Exchanger FRONT LINE 8-RM, 3 sections, AISI 316
Balance Tank BTD-350, AISI 304
Sanitary Centrifugal Pump LKH, frequency-controlled speed
Centrifugal Pump LKH for cooling media
Control Paned with Siemens C7 PLC and TP 270 operator interface
Set of valves, process indicators and piping

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.


Join Our
Mailing List!