Contact Seller

Flash Pasteurizer TCMI Padovan 32 hl/h - three circuits

Year: 2016
Condition: Used
Located in Finland
Ref #: 149507

Product Description

Flash Pasteurizer TCMI-Padovan 32 hl/h – 2016

This flash pasteurizer was manufactured in 2016 by Italian TCMI Padovan and it was in operation till 2019 pasteurizing carbonated and non-carbonated soft drinks. Pasteurizer is completely build on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using hot water for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a service tank for product feed and for water during CIP process, heat exchanger, holding / pasteurization tube, control cabinet, pumps, pipes, valves and instruments. 

Pasteurization process is controller with four freely programmable JUMO Detron controlling units. The high-contrast, multicolor LCD display for process value, setpoint and operator prompting has two four-digit 7-segment displays, two single-character 16 segment displays, display of the active set points, six status indicators, and displays for the unit, ramp function and manual operation. Just four keys on the front panel are needed for operation, continuous controllers. The user-friendly controller software for normal PC includes a program or ramp function, parameter set changeover, two autotuning (self-optimization) procedures, a math and logic module, as well as 4 limit comparators

Technical Characteristics

Manufacturer                           TCMI Padovan, Italy

Manufacturing year                2016

Flow rate max                         4000 l/h - Sugar syrup max 55 Brix

Pasteurization temp max        +93C

Holding time max                   30 sec in pasteurization temperature

Plate heat exchanger type       Alfa-Laval M6-M

Plate heat transfer area            0.14 m2  (AISI 316)

Hot water inlet max                6000 l/h at +100C

Cooling media inlet max        5100 l/h at +15C                    

Heat recovery                          85%

Control units                           4 x JUMO Detron 308

Absorbed power                      10 kW / 400V / 50 Hz

Certification                            CE

 

Thank you for visiting our website. Unfortunately, this machine is no longer available however, please find a selection of machines for sale below; which may be of interest to you.

Product Description

Flash Pasteurizer TCMI-Padovan 32 hl/h – 2016

This flash pasteurizer was manufactured in 2016 by Italian TCMI Padovan and it was in operation till 2019 pasteurizing carbonated and non-carbonated soft drinks. Pasteurizer is completely build on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using hot water for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a service tank for product feed and for water during CIP process, heat exchanger, holding / pasteurization tube, control cabinet, pumps, pipes, valves and instruments. 

Pasteurization process is controller with four freely programmable JUMO Detron controlling units. The high-contrast, multicolor LCD display for process value, setpoint and operator prompting has two four-digit 7-segment displays, two single-character 16 segment displays, display of the active set points, six status indicators, and displays for the unit, ramp function and manual operation. Just four keys on the front panel are needed for operation, continuous controllers. The user-friendly controller software for normal PC includes a program or ramp function, parameter set changeover, two autotuning (self-optimization) procedures, a math and logic module, as well as 4 limit comparators

Technical Characteristics

Manufacturer                           TCMI Padovan, Italy

Manufacturing year                2016

Flow rate max                         4000 l/h - Sugar syrup max 55 Brix

Pasteurization temp max        +93C

Holding time max                   30 sec in pasteurization temperature

Plate heat exchanger type       Alfa-Laval M6-M

Plate heat transfer area            0.14 m2  (AISI 316)

Hot water inlet max                6000 l/h at +100C

Cooling media inlet max        5100 l/h at +15C                    

Heat recovery                          85%

Control units                           4 x JUMO Detron 308

Absorbed power                      10 kW / 400V / 50 Hz

Certification                            CE

 

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.


Join Our
Mailing List!