Contact Seller

ERNST EM6NL1400 + B (SKLL+B)

Year: 2007
Condition: Used
Located in UK
Ref #: 89114

Product Description


Basic equipment:
Working from the top, width of cylinder 1400 mm, actual working width
1380 mm, machine equipped as follows:
1.0: Deburring unit
Extremely elastic, soft and smooth deburring cylinder to be
covered by abrasive cloth or grinding fleece. Equipped with
pneumatic clamps and a pneumatic tension segment for an easy
clamping and tightening of the abrasive cloth or grinding fleece.
Cylinder is adjustable in height according to the thickness of the
abrasive material.
Drive motor: 11 kW .Dimension of abrasives: 1400 mm wide x 1540
mm long.
2.0: Wide Belt unit with rubberized contact drum, Ø 200 mm
(standard hardness 40°) for endless abrasive belt. Abrasive belt
oscillating, easy to adjust to different paper grits/thicknesses. Contact
drum with automatic lift up mechanism when not used. Abrasive
dimensions 1400 mm wide x 2150 mm long. Driven by motor with 18,5
KW. (optional with frequency inverter)

3.0: 2 counter-rotating brush-head shafts, for brush media Ø 350 mm
(brush media see options), each driven with one motor 5,5 KW.
4.0: Machine prpared for 3.rd brush roller, Ø 250 mm (additional
charge see options)
5.0: Wet grinding device
Gravity band filter device with integrated supply pump for coolant
emulsion, one nozzle tube each for grinding roller and brush roller.
Filter device equipped with tissue collecting the dirt particles until filter
resistance increases so that the tissue ist transported automatically.
The used tissue with the dirt particles is collected in a mud box. The
total filter device is mounted below the transport belt and fixed on rolls
so that it can be moved out of the machine easily. Water capacity:
approx 390 l.
6.0: Washing and drying device
Installed at the exit of the machine, consisting of: Washing device
with nozzle tube; amount of water can be regulated. Drying device
with upper and lower guiding rolls; two continuous air nozzles;
one acting from the top and one acting from the bottom. The amount
of air can be regulated. Machine with integrated high pressure fan
designed for work pieces with a minimum length of 80 mm (for
vacuum suction device and/or for magnetic belt see options).
Machine equipped with continuous conveyor belt, pressure rolls
acting from the top, 350 mm apart.
Switch cabinet mounted on the machine. Electrical operating
elements in the control cabinet, programm start of the complete
machine, safety flap at the entry of the machine. Machine with
electronic fault location device "ORTOMAT" with 21 light emitting
diodes. Machine with electro-mechanical work piece thickness
adjustment device and automatic transport belt control. Includes
water collecting basin which is installed below the transport frame
and covers the complete width and length of the machine.
Construction according to the accident prevention regulation "EN
294". Minimum work piece length: 350 mm for shorter parts see
vacuum suction device and/or magnetic belt (see options).
Technical data:
Operating side: left
Wide belt: changed on the right side
Work piece thickness: 1 - 70 mm
Constant working height: approx. 1000 mm
Operating voltage: 400 V, 50 Hz
Feed speed: approx 2/4 m/min
Finish:
Top: RAL 7035 light grey
Base: RAL 3003 ruby red
Hardness of the deburring cylinder: approx 15°shore
Hardness of wide belt drum: approx. 40° shore
Noise level: approx 85 dBA
Size of abrasive:
Deburring cylinder: 1400 mm wide x 1540 mm
long
Wide Belt unit: 1400 mm wide x 2150 mm
long

Contact the Seller

For more information or to express interest in this machine,
please fill out this short enquiry form:

*First Name
*Company
*Country
*Telephone
Website
*Email
*Confirm Email
*Message

Product Description


Basic equipment:
Working from the top, width of cylinder 1400 mm, actual working width
1380 mm, machine equipped as follows:
1.0: Deburring unit
Extremely elastic, soft and smooth deburring cylinder to be
covered by abrasive cloth or grinding fleece. Equipped with
pneumatic clamps and a pneumatic tension segment for an easy
clamping and tightening of the abrasive cloth or grinding fleece.
Cylinder is adjustable in height according to the thickness of the
abrasive material.
Drive motor: 11 kW .Dimension of abrasives: 1400 mm wide x 1540
mm long.
2.0: Wide Belt unit with rubberized contact drum, Ø 200 mm
(standard hardness 40°) for endless abrasive belt. Abrasive belt
oscillating, easy to adjust to different paper grits/thicknesses. Contact
drum with automatic lift up mechanism when not used. Abrasive
dimensions 1400 mm wide x 2150 mm long. Driven by motor with 18,5
KW. (optional with frequency inverter)

3.0: 2 counter-rotating brush-head shafts, for brush media Ø 350 mm
(brush media see options), each driven with one motor 5,5 KW.
4.0: Machine prpared for 3.rd brush roller, Ø 250 mm (additional
charge see options)
5.0: Wet grinding device
Gravity band filter device with integrated supply pump for coolant
emulsion, one nozzle tube each for grinding roller and brush roller.
Filter device equipped with tissue collecting the dirt particles until filter
resistance increases so that the tissue ist transported automatically.
The used tissue with the dirt particles is collected in a mud box. The
total filter device is mounted below the transport belt and fixed on rolls
so that it can be moved out of the machine easily. Water capacity:
approx 390 l.
6.0: Washing and drying device
Installed at the exit of the machine, consisting of: Washing device
with nozzle tube; amount of water can be regulated. Drying device
with upper and lower guiding rolls; two continuous air nozzles;
one acting from the top and one acting from the bottom. The amount
of air can be regulated. Machine with integrated high pressure fan
designed for work pieces with a minimum length of 80 mm (for
vacuum suction device and/or for magnetic belt see options).
Machine equipped with continuous conveyor belt, pressure rolls
acting from the top, 350 mm apart.
Switch cabinet mounted on the machine. Electrical operating
elements in the control cabinet, programm start of the complete
machine, safety flap at the entry of the machine. Machine with
electronic fault location device "ORTOMAT" with 21 light emitting
diodes. Machine with electro-mechanical work piece thickness
adjustment device and automatic transport belt control. Includes
water collecting basin which is installed below the transport frame
and covers the complete width and length of the machine.
Construction according to the accident prevention regulation "EN
294". Minimum work piece length: 350 mm for shorter parts see
vacuum suction device and/or magnetic belt (see options).
Technical data:
Operating side: left
Wide belt: changed on the right side
Work piece thickness: 1 - 70 mm
Constant working height: approx. 1000 mm
Operating voltage: 400 V, 50 Hz
Feed speed: approx 2/4 m/min
Finish:
Top: RAL 7035 light grey
Base: RAL 3003 ruby red
Hardness of the deburring cylinder: approx 15°shore
Hardness of wide belt drum: approx. 40° shore
Noise level: approx 85 dBA
Size of abrasive:
Deburring cylinder: 1400 mm wide x 1540 mm
long
Wide Belt unit: 1400 mm wide x 2150 mm
long

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.


Join Our
Mailing List!