Contact Seller

IMA COMBIMAT/II/Q/MN/MEV/DD

Year: Unknown
Condition: Used
Located in Italy
Ref #: 129052

Product Description

Subfamily Double Sided Combination Edgebander 
Min. panel height 8 mm
Max. panel height 60 mm
Max. forward feed speed 45 m/min
Conveyor Track with dogs 
Distance between dogs 300 mm
Top pressure 
Pressure with rubber belt 
Panel support guides 
with positioning by NC 
No. Panel Sizing / Milling units Right Side 2 

1
Unit pre-milling unit 
automatic timed intervention 
motor power 4.5 KW
r.p.m. 12000 RPM

2
Unit double chipper, top and bottom 
with positioning by NC 
motor power 6 KW
r.p.m. 5870 RPM

Same technical characteristics on the left side 
Lamps to preheat the side of the panel 
Edge coil magazine 
no. positions 24 
Gluing system 
glue pot for hot melt glue 
premelter for hot melt glue 
Roller set to press the edge 
no. pressure roller 7 
No. Edge Processing Units 9 

1
Processing Unit end trimming unit 
no. motors 2 
with positioning by NC 
Max. machining speed 32 m/min

2
Processing Unit fine trimming unit to trim and round 
no. motors 2 
with positioning by NC 
motor power 1 KW
r.p.m. 12000 RPM

3
Processing Unit Corner rounding unit 
no. motors 2 
automatic tool change 
with positioning by NC 
Max. machining speed 20 m/min
motor power 0.6 KW
r.p.m. 12000 RPM

4
Processing Unit edge scraping unit 
with positioning by NC 

5
Processing Unit glue scraping unit 

6
Processing Unit buffing unit 
no. motors 4 

7
Processing Unit milling hogging unit 
automatic timed intervention 

8
Processing Unit milling hogging unit 
with positioning by NC 
automatic timed intervention 
motor power 6.6 KW
r.p.m. 5870 RPM

9
Processing Unit milling hogging unit 
with positioning by NC 
automatic timed intervention 
motor power 6.6 KW
r.p.m. 5870 RPM

Spray unit yes 
Units fitted on overtables 
with positioning by NC  
Control system IMATRONIC 
Safety standard CE mark 

Thank you for visiting our website. Unfortunately, this machine is no longer available however, please find a selection of machines for sale below; which may be of interest to you.

  • BRANDT KD 95

    Edgebanding machine single sided Panel thickness: 8 - 55 mm Feed speed: 15 - 25 m/min Edge thickness: 0,4 - 20 mm Equipment: Hot melt unit: QA34 / A20 Coil ...

  • BRANDT HIGHFLEX 1230 - KDF 230

    Squaring and edgebanding machine single sided Edges up to 3 mm from coil, 6 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm* When Workpie...

  • BRANDT HIGHFLEX 1220 - KDF 220

    Squaring and edgebanding machine single sided Edges up to 3 mm from coil, 6 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm* When Workpie...

Click Here For More Results

All Categories > Woodworking > CNC > Edge Bander

Product Description

Subfamily Double Sided Combination Edgebander 
Min. panel height 8 mm
Max. panel height 60 mm
Max. forward feed speed 45 m/min
Conveyor Track with dogs 
Distance between dogs 300 mm
Top pressure 
Pressure with rubber belt 
Panel support guides 
with positioning by NC 
No. Panel Sizing / Milling units Right Side 2 

1
Unit pre-milling unit 
automatic timed intervention 
motor power 4.5 KW
r.p.m. 12000 RPM

2
Unit double chipper, top and bottom 
with positioning by NC 
motor power 6 KW
r.p.m. 5870 RPM

Same technical characteristics on the left side 
Lamps to preheat the side of the panel 
Edge coil magazine 
no. positions 24 
Gluing system 
glue pot for hot melt glue 
premelter for hot melt glue 
Roller set to press the edge 
no. pressure roller 7 
No. Edge Processing Units 9 

1
Processing Unit end trimming unit 
no. motors 2 
with positioning by NC 
Max. machining speed 32 m/min

2
Processing Unit fine trimming unit to trim and round 
no. motors 2 
with positioning by NC 
motor power 1 KW
r.p.m. 12000 RPM

3
Processing Unit Corner rounding unit 
no. motors 2 
automatic tool change 
with positioning by NC 
Max. machining speed 20 m/min
motor power 0.6 KW
r.p.m. 12000 RPM

4
Processing Unit edge scraping unit 
with positioning by NC 

5
Processing Unit glue scraping unit 

6
Processing Unit buffing unit 
no. motors 4 

7
Processing Unit milling hogging unit 
automatic timed intervention 

8
Processing Unit milling hogging unit 
with positioning by NC 
automatic timed intervention 
motor power 6.6 KW
r.p.m. 5870 RPM

9
Processing Unit milling hogging unit 
with positioning by NC 
automatic timed intervention 
motor power 6.6 KW
r.p.m. 5870 RPM

Spray unit yes 
Units fitted on overtables 
with positioning by NC  
Control system IMATRONIC 
Safety standard CE mark 

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.


Join Our
Mailing List!