Contact Seller
HOMAG VFL 79/02
Year:
1993
Condition:
Used
Located in
Belgium
Ref #:
150806
![]()
Product Description
Postforming machine
Single sided postforming line, capable of doing L - and U profiles, with or without insert.
Workpiece thickness: 16 to 60 mm.
Min. workpiece width: 150 mm.
Workpiece overhang: 70 mm.
Max. laminate overhang: 105 mm.
Feed speed 3 - 18 m/min.
Fence side at the left
Equipment:
Squaring and shaping part:
1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate
1 x scoring, motor 1 kW, top position
1 x milling unit for the laminate when doing U profiles
1 x laminate support
Postforming part
1 x blow cleaning nozzle
6 x glue nozzle for the glue application
2 x glue roller
9 x IR heating, each 2,2 kW
2 x Hot air blower, each 10 kW
1 x Basic postforming pressure zone for L-profiles, using rollers
1 x Basic postforming pressure zone for U-profiles, using rollers
1 x VF postforming pressure zone for special profiles, using pressure paths
Finishing part:
1 x Top fine trimming unit 0,6 kW
1 x Milling unit for U-profiles or laminate grooving
1 x Basic postforming pressure zone for L-profiles, using rollers
1 x Insert/inlay grooving unit UF13, motor 2,25kW
1 x inlay/insert unit with PVAc glue application, cleaning blower, insert supply from the top
1 x Top buffing unit
Thank you for visiting our website. Unfortunately, this machine is no longer available however, please find a selection of machines for sale below; which may be of interest to you.
-
HOMAG VFL 79/02
Postforming machine Single sided postforming line, capable of doing L - and U profiles, with or without insert. Workpiece thickness: 16 to 60 mm. Min. workpiec...
-
BRANDT PROFILINE KDF 560
Squaring and edgebanding machine single sided Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Wo...
-
BRANDT KTD 51
edge bander for curved pieces Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0...
Product Description
Postforming machine
Single sided postforming line, capable of doing L - and U profiles, with or without insert.
Workpiece thickness: 16 to 60 mm.
Min. workpiece width: 150 mm.
Workpiece overhang: 70 mm.
Max. laminate overhang: 105 mm.
Feed speed 3 - 18 m/min.
Fence side at the left
Equipment:
Squaring and shaping part:
1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate
1 x scoring, motor 1 kW, top position
1 x milling unit for the laminate when doing U profiles
1 x laminate support
Postforming part
1 x blow cleaning nozzle
6 x glue nozzle for the glue application
2 x glue roller
9 x IR heating, each 2,2 kW
2 x Hot air blower, each 10 kW
1 x Basic postforming pressure zone for L-profiles, using rollers
1 x Basic postforming pressure zone for U-profiles, using rollers
1 x VF postforming pressure zone for special profiles, using pressure paths
Finishing part:
1 x Top fine trimming unit 0,6 kW
1 x Milling unit for U-profiles or laminate grooving
1 x Basic postforming pressure zone for L-profiles, using rollers
1 x Insert/inlay grooving unit UF13, motor 2,25kW
1 x inlay/insert unit with PVAc glue application, cleaning blower, insert supply from the top
1 x Top buffing unit