Contact Seller
HOMAG KL 78/A20/S2
Year:
1999
Condition:
Used
Located in
Belgium
Ref #:
151699
Product Description
Squaring and edgebanding machine single sided
Panel thickness: 12 - 60 mm
Feed speed: 18 - 24 m/min
Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood
Equipment:
Help carriage feeding the panels rectangular
automatic fence at the infeed
Squaring device: 2 x 3,0 KW
Panel edge pre-heater
Hot melt unit: QA34 / A20
edge magazine
Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers
End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW
Rough trimming: 2 x 1,5 KW
Top/bottom fine trimming, tilting, 2 x 0,4 kW
Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers
Universal milling motor 4kW
Profile scrapers
Flat scrapers
Buffing unit with oscillation
Controlls: HOMATIC NC16
Thank you for visiting our website. Unfortunately, this machine is no longer available however, please find a selection of machines for sale below; which may be of interest to you.
-
HOMAG KL 78/A20/S2
Squaring and edgebanding machine single sided Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for ...
-
BRANDT KTD 51
edge bander for curved pieces Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0...
-
BRANDT AMBITION 1220 - KDF 220 C
Squaring and edgebanding machine single sided Edges up to 3 mm from coil, 3 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm* When Workpi...
Product Description
Squaring and edgebanding machine single sided
Panel thickness: 12 - 60 mm
Feed speed: 18 - 24 m/min
Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood
Equipment:
Help carriage feeding the panels rectangular
automatic fence at the infeed
Squaring device: 2 x 3,0 KW
Panel edge pre-heater
Hot melt unit: QA34 / A20
edge magazine
Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers
End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW
Rough trimming: 2 x 1,5 KW
Top/bottom fine trimming, tilting, 2 x 0,4 kW
Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers
Universal milling motor 4kW
Profile scrapers
Flat scrapers
Buffing unit with oscillation
Controlls: HOMATIC NC16