Contact Seller
HOMAG KAL210 AMBITION 2264 - ZHR 05/L/085
Year:
2012
Condition:
Used
Located in
Belgium
Ref #:
150872
![]()
Product Description
Squaring and edgebanding machine single sided
Fixed side at the left
Feedspeed 18 - 25 m/min
Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm
Panel overhang 30mm
Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations)
Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm
Coil diameter 830 mm
Equipment:
Sprayers release agent
Squaring device with 2 motors each 3 kW
Edge heating
Edge magazine for 2 coils, guillotine for edges up to 3 mm
Glueing part A20 with quickmelt application
Lateral pressure zone K, 1 driven and 6 after pressing rollers
End trims HL84, 2 motors each 0,8kW
Rough trimming, 2 motors 1,5kW
Contour trimming, 2 exchange units
Profile scraping PN10
Flat scrapers FA11
Sprayers cleaning agent
Buffing
Automation package straight/chamfer:
-Automatic adjustment infeed fence
-Automatic setting of pressure rollers
-Pneumatic setting of end trims
-Pneumatic setting of rough trims
-Automatic setting of chamfer/radius on the contour trims
-Pneumatic setting of profile and flat scraping units
-Electronic height positioning
ZHR 05/L/085 (construction year 2001)
Return conveyor for panels coming out of a single sided shaping or edge banding machine with fence at the left and with a length of approx. 8,5 m.
Max. panelsizes: 2000 x 800 mm., min. 300 x 150 mm.
At the machine outfeed, a tilting air flotation table brings the panels on the return conveyor belt
Long panels pass a fence roller which turns them lengthwise on the return belt
Thank you for visiting our website. Unfortunately, this machine is no longer available however, please find a selection of machines for sale below; which may be of interest to you.
-
-
BRANDT PROFILINE KDF 560
Squaring and edgebanding machine single sided Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Wo...
-
BRANDT KTD 51
edge bander for curved pieces Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0...
Product Description
Squaring and edgebanding machine single sided
Fixed side at the left
Feedspeed 18 - 25 m/min
Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm
Panel overhang 30mm
Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations)
Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm
Coil diameter 830 mm
Equipment:
Sprayers release agent
Squaring device with 2 motors each 3 kW
Edge heating
Edge magazine for 2 coils, guillotine for edges up to 3 mm
Glueing part A20 with quickmelt application
Lateral pressure zone K, 1 driven and 6 after pressing rollers
End trims HL84, 2 motors each 0,8kW
Rough trimming, 2 motors 1,5kW
Contour trimming, 2 exchange units
Profile scraping PN10
Flat scrapers FA11
Sprayers cleaning agent
Buffing
Automation package straight/chamfer:
-Automatic adjustment infeed fence
-Automatic setting of pressure rollers
-Pneumatic setting of end trims
-Pneumatic setting of rough trims
-Automatic setting of chamfer/radius on the contour trims
-Pneumatic setting of profile and flat scraping units
-Electronic height positioning
ZHR 05/L/085 (construction year 2001)
Return conveyor for panels coming out of a single sided shaping or edge banding machine with fence at the left and with a length of approx. 8,5 m.
Max. panelsizes: 2000 x 800 mm., min. 300 x 150 mm.
At the machine outfeed, a tilting air flotation table brings the panels on the return conveyor belt
Long panels pass a fence roller which turns them lengthwise on the return belt
Other Machines You May Like