Contact Seller
BRANDT PROFILINE KDF 560
Year:
2008
Condition:
Used
Located in
Belgium
Ref #:
151615
Product Description
Squaring and edgebanding machine single sided
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit
Edge thickness: 0,4 to 12 mm
Workpiece thickness: 8 - 60 mm
Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming)
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
Equipment:
Adjustable fence
Pre-milling with 2 shapers, each 2,2 kW
Coil and strip magazine
Hot melt unit, Quickmelt type
Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers
End trims, 2 x 0,35 kW motors, straight and chamfer 15°
Top/bottom trimming, motors 2 x 0,35 kW
Radius trimmming
Contour trimming unit, leading and following edge, 2 x 0,35 kW
Radius scraping unit
Glue scrapers
Buffing unit
Controlls PC 20+
Thank you for visiting our website. Unfortunately, this machine is no longer available however, please find a selection of machines for sale below; which may be of interest to you.
-
BRANDT PROFILINE KDF 560
Squaring and edgebanding machine single sided Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Wo...
-
BRANDT PROFILINE KDF 560
Squaring and edgebanding machine single sided Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Wo...
-
BRANDT KTD 51
edge bander for curved pieces Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0...
Product Description
Squaring and edgebanding machine single sided
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit
Edge thickness: 0,4 to 12 mm
Workpiece thickness: 8 - 60 mm
Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming)
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
Equipment:
Adjustable fence
Pre-milling with 2 shapers, each 2,2 kW
Coil and strip magazine
Hot melt unit, Quickmelt type
Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers
End trims, 2 x 0,35 kW motors, straight and chamfer 15°
Top/bottom trimming, motors 2 x 0,35 kW
Radius trimmming
Contour trimming unit, leading and following edge, 2 x 0,35 kW
Radius scraping unit
Glue scrapers
Buffing unit
Controlls PC 20+
Other Machines You May Like