Contact Seller
BRANDT HIGHFLEX 1220 - KDF 220
Year:
2013
Condition:
Used
Located in
Belgium
Ref #:
144438
Product Description
Squaring and edgebanding machine single sided
Edges up to 3 mm from coil, 6 mm strips
Workpiece width min:
When Workpiece thickness 12-22mm 70 mm*
When Workpiece thickness23-40 mm, 120 mm*
When Workpiece thicknesse 41-60mm 150 mm*
*in relation to workpiece length
Feed speed 11 m/min
Equipment:
Pre-Milling 2 X 2,2 KW
Pre-heating of panel edge
Glue aggregate A6
Coil edge magazine
Pressure zone, central positioning
End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control
Top & Bottom trimmng, 2 X 0,27 KW, automatic adjustment when switching from straight to angle
Corner rounding unit 1 X 0,35 KW, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece length: 250 mm.
Profile scraping unit, quick toolchange, edge thickness: max. 3 mm, electro-pneumatic setting by central control
Glue scraping unit
Installed options:
-Tooling R= 2 mm
-Automatic infeed of the edges KDX1210 (fast exchange of coil edges)
-Contour trims 4802 with vertical action doing shelves
Thank you for visiting our website. Unfortunately, this machine is no longer available however, please find a selection of machines for sale below; which may be of interest to you.
-
BRANDT KDF 550
Squaring and edgebanding machine single sided Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 8 mm Wor...
-
BRANDT KD 97 C
Edge bander single sided Single sided edge bander Edges: 0,4 to 5 mm, strips 0,8 to 20 mm. Panel thickness: 8 to 55 mm, motorised setting (programmable) Feed ...
-
BRANDT KD 95
Edgebanding machine single sided Panel thickness: 8 - 55 mm Feed speed: 15 - 25 m/min Edge thickness: 0,4 - 20 mm Equipment: Hot melt unit: QA34 / A20 Coil ...
Product Description
Squaring and edgebanding machine single sided
Edges up to 3 mm from coil, 6 mm strips
Workpiece width min:
When Workpiece thickness 12-22mm 70 mm*
When Workpiece thickness23-40 mm, 120 mm*
When Workpiece thicknesse 41-60mm 150 mm*
*in relation to workpiece length
Feed speed 11 m/min
Equipment:
Pre-Milling 2 X 2,2 KW
Pre-heating of panel edge
Glue aggregate A6
Coil edge magazine
Pressure zone, central positioning
End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control
Top & Bottom trimmng, 2 X 0,27 KW, automatic adjustment when switching from straight to angle
Corner rounding unit 1 X 0,35 KW, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece length: 250 mm.
Profile scraping unit, quick toolchange, edge thickness: max. 3 mm, electro-pneumatic setting by central control
Glue scraping unit
Installed options:
-Tooling R= 2 mm
-Automatic infeed of the edges KDX1210 (fast exchange of coil edges)
-Contour trims 4802 with vertical action doing shelves