Contact Seller
BRANDT AMBITION 1220 - KDF 220 C
Year:
2009
Condition:
Used
Located in
Belgium
Ref #:
151642
Product Description
Squaring and edgebanding machine single sided
Edges up to 3 mm from coil, 3 mm strips
Workpiece width min:
When Workpiece thickness 12-22mm 70 mm*
When Workpiece thickness23-50 mm, 120 mm*
*in relation to workpiece length
Overhang: 38 mm
Workpiece thickness 8 - 50 mm
Feed speed 10 m/min
EC10+ controlls with LCD screen
Equipment:
Fence with manual adjustment
Pre-Milling 2 X 2,2 KW, 1 x clockwise, 1x counter clockwise, electro-pneumatic setting, max. cut of 3 mm., max. panel thickness 42 mm
Pre-heating of panel edge
Hot melt glue aggregate with glue roller
Coil and strip edge magazine
Pressure zone, manual positioning
End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic settingby central control
Top & Bottom trimmng, 2 X 0,27 KW, automatic adjustment when switching from straight tochamfer
Corner rounding unit 1 X 0,35 KW, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 10 m/min., min workpiece length: 250 mm.
Profile scraping unit, edge thickness: max. 3 mm, electro-pneumatic setting by central control
Glue scraping unit
Thank you for visiting our website. Unfortunately, this machine is no longer available however, please find a selection of machines for sale below; which may be of interest to you.
-
BRANDT AMBITION 1220 - KDF 220 C
Squaring and edgebanding machine single sided Edges up to 3 mm from coil, 3 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm* When Workpi...
-
BRANDT PROFILINE KDF 560
Squaring and edgebanding machine single sided Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Wo...
-
BRANDT KTD 51
edge bander for curved pieces Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0...
Product Description
Squaring and edgebanding machine single sided
Edges up to 3 mm from coil, 3 mm strips
Workpiece width min:
When Workpiece thickness 12-22mm 70 mm*
When Workpiece thickness23-50 mm, 120 mm*
*in relation to workpiece length
Overhang: 38 mm
Workpiece thickness 8 - 50 mm
Feed speed 10 m/min
EC10+ controlls with LCD screen
Equipment:
Fence with manual adjustment
Pre-Milling 2 X 2,2 KW, 1 x clockwise, 1x counter clockwise, electro-pneumatic setting, max. cut of 3 mm., max. panel thickness 42 mm
Pre-heating of panel edge
Hot melt glue aggregate with glue roller
Coil and strip edge magazine
Pressure zone, manual positioning
End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic settingby central control
Top & Bottom trimmng, 2 X 0,27 KW, automatic adjustment when switching from straight tochamfer
Corner rounding unit 1 X 0,35 KW, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 10 m/min., min workpiece length: 250 mm.
Profile scraping unit, edge thickness: max. 3 mm, electro-pneumatic setting by central control
Glue scraping unit