Contact Seller

KUSTERS COLD PAD BATCH DYEING

Year: 2019
Condition: Used
Located in UK
Ref #: 127654

Product Description

MACHINE RECONDITIONED TO ORDER

TYPE 222.17-3200
ROLLER WIDTH 3400MM
TO BE FULLY RECONDITIONED IN 2019,  SUBJECT TO ORDER
PRE- TENSION ENTRANCE FRAME WITH PATH ROLLERS
E+L KF20 -20 FABRIC EDGE GUIDERS
ONE BOW SPREADER ROLLER MOUNTED BEFORE THE SQUEEZING POINT
2 HORIZONTAL SWIMMING ROLLERS WITH FLOATING NIP – 75% SHORE HARDNESS
COLOUR LEVEL SENSOR IN THE DYEBATH CONNECTED TO THE DOSING PUMP
MAIN DRIVE 11KW AC FREQUENCY INVERTER
TAKE OFF VIA BASTION HYDRAULIC A - FRAME ROLLING UNIT AT EXIT TO ROLL-UP THE DYED FABRIC - WITH PHOTOCELL CAPACITIVE UNIT TO AVOID CONTACT BETWEEN CYLINDER ROLLER – FITTED WITH NEW CENTER WIND DRIVE TO CONNECT TO THE A- FRAME TROLLEY 
2 X STAINLESS STEEL MIXING TANKS & SERA DOSING PUMP FOR DYE AND ALKALI

RECONDITIONING WORK AS FOLLOWS:

Completely strip the machine down to its individual components shot blast clean and repaint all reusable parts.

Mechanical work

Replace all transmission parts such as bearings belts and chains
All new fasteners such as nuts and bolts.
Recondition all geared drives and fit with new motors or rewind the original motor
Recover with new rubber the 2 S rollers 
Recover with new rubber the 1 bow roller 
Recover with new rubber tape covering the fabric draw rollers
Polish all ss path rollers and stainless steel trough 

Electrical work
 
New control panel with new AC inverter by ABB or Siemens all new cables & safety switches  from the main control panel to the motors and switches.  

 

Contact the Seller

For more information or to express interest in this machine,
please fill out this short enquiry form:

*First Name
*Company
*Country
*Telephone
Website
*Email
*Confirm Email
*Message

Product Description

MACHINE RECONDITIONED TO ORDER

TYPE 222.17-3200
ROLLER WIDTH 3400MM
TO BE FULLY RECONDITIONED IN 2019,  SUBJECT TO ORDER
PRE- TENSION ENTRANCE FRAME WITH PATH ROLLERS
E+L KF20 -20 FABRIC EDGE GUIDERS
ONE BOW SPREADER ROLLER MOUNTED BEFORE THE SQUEEZING POINT
2 HORIZONTAL SWIMMING ROLLERS WITH FLOATING NIP – 75% SHORE HARDNESS
COLOUR LEVEL SENSOR IN THE DYEBATH CONNECTED TO THE DOSING PUMP
MAIN DRIVE 11KW AC FREQUENCY INVERTER
TAKE OFF VIA BASTION HYDRAULIC A - FRAME ROLLING UNIT AT EXIT TO ROLL-UP THE DYED FABRIC - WITH PHOTOCELL CAPACITIVE UNIT TO AVOID CONTACT BETWEEN CYLINDER ROLLER – FITTED WITH NEW CENTER WIND DRIVE TO CONNECT TO THE A- FRAME TROLLEY 
2 X STAINLESS STEEL MIXING TANKS & SERA DOSING PUMP FOR DYE AND ALKALI

RECONDITIONING WORK AS FOLLOWS:

Completely strip the machine down to its individual components shot blast clean and repaint all reusable parts.

Mechanical work

Replace all transmission parts such as bearings belts and chains
All new fasteners such as nuts and bolts.
Recondition all geared drives and fit with new motors or rewind the original motor
Recover with new rubber the 2 S rollers 
Recover with new rubber the 1 bow roller 
Recover with new rubber tape covering the fabric draw rollers
Polish all ss path rollers and stainless steel trough 

Electrical work
 
New control panel with new AC inverter by ABB or Siemens all new cables & safety switches  from the main control panel to the motors and switches.  

 

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.


Join Our
Mailing List!