Contact Seller

Water Deaeration System CENTEC DGS 200 hl/h

Year: 2001
Condition: Used
Located in Finland
Ref #: 108094

Product Description

Water Deaeration System CENTEC DGS Membrane 200 hl/h, year 2001

Membrane Water Deaeration system made by CENTEC in year 2001. The DGS is a modular water deaeration system based on membrane contactors. The skit is designed to grant low running costs compared to other methods based on high efficiency of the membrane contactors. Very low residual oxygen values are achieved with small energy and purge gas consumption (CO2 or N2).

Easy upgrading of capacity by adding contactors, currently it has three contactors, full automatic and maintenance free operation, short run up time, variable capacity range and a small foot print are important advantages achieved due to the membrane contactors. The membrane material is hydro-phobe Polypropylene which can be passed only gases and they are so called hydrophobe hollow fibre membranes where a fast exchange of gas out of the water is possible. The water is flowing along the outer side of the hollow fiber by the cross-flow principle. Through the inner side of the hollow fibre purge gas (CO2 or N2) is flowing at low pressure and sucked out by a vacuum pump. The piping of the unit was designed to have an inbuilt UV system which is a part of delivery.

The hollow fiber membrane contactors can be cleaned at temperatures of 85 °C. For cleaning food grade units, caustic soda and phosphoric acid can be used with concentration ranges of 1 to 3%. No surfactants or additives should be used in either the caustic or the acid. Equipment is good condition and ready for delivery.

 

Technical specifications:

 

Manufacturer:                     CENTEC

Manufacturer year:             2001

Type:             DGS 200

Capacity:       1 – 200 hl/h

Number of contactors:        3

Residual oxygen content:   max. 0,003 mg/l

CO2 – (N2-) consumption:  4,6 Nm3/h

Operating temperature:       0 0C - +45 0C

CIP:              max. +85 0C

PLC:             Siemens Simatic S7

Condition:     Good Condition

 

Contact the Seller

For more information or to express interest in this machine,
please fill out this short enquiry form:

*First Name
*Company
*Country
*Telephone
Website
*Email
*Confirm Email
*Message

Product Description

Water Deaeration System CENTEC DGS Membrane 200 hl/h, year 2001

Membrane Water Deaeration system made by CENTEC in year 2001. The DGS is a modular water deaeration system based on membrane contactors. The skit is designed to grant low running costs compared to other methods based on high efficiency of the membrane contactors. Very low residual oxygen values are achieved with small energy and purge gas consumption (CO2 or N2).

Easy upgrading of capacity by adding contactors, currently it has three contactors, full automatic and maintenance free operation, short run up time, variable capacity range and a small foot print are important advantages achieved due to the membrane contactors. The membrane material is hydro-phobe Polypropylene which can be passed only gases and they are so called hydrophobe hollow fibre membranes where a fast exchange of gas out of the water is possible. The water is flowing along the outer side of the hollow fiber by the cross-flow principle. Through the inner side of the hollow fibre purge gas (CO2 or N2) is flowing at low pressure and sucked out by a vacuum pump. The piping of the unit was designed to have an inbuilt UV system which is a part of delivery.

The hollow fiber membrane contactors can be cleaned at temperatures of 85 °C. For cleaning food grade units, caustic soda and phosphoric acid can be used with concentration ranges of 1 to 3%. No surfactants or additives should be used in either the caustic or the acid. Equipment is good condition and ready for delivery.

 

Technical specifications:

 

Manufacturer:                     CENTEC

Manufacturer year:             2001

Type:             DGS 200

Capacity:       1 – 200 hl/h

Number of contactors:        3

Residual oxygen content:   max. 0,003 mg/l

CO2 – (N2-) consumption:  4,6 Nm3/h

Operating temperature:       0 0C - +45 0C

CIP:              max. +85 0C

PLC:             Siemens Simatic S7

Condition:     Good Condition

 

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.