Contact Seller

PET Bottle Filling Line 6.000 bph SIPA - Berchi 1.0 and 1.5 L

Year: 2006
Condition: Used
Located in Finland
Ref #: 105207

Product Description

PET Bottle Filling Line SIPA - Berchi 6000 bph - 1.0 and 1.5 liters

This line was installed in late 2006 and it is still running but available for immediate dismantling. All machinery is in very good working order, the line has capacity of 6000 bph in 1.0 and 1.5 liter PET bottles. (Also 2.5 liter molds are included, then capacity 3000 bph) Today it is used for beer but it can be used for still and other carbonated soft drinks as well. Blow molder is two-stage SIPA linear stretch blow-molding machine with fully electric brushless motors and it is working has a blowing-air recovery system. It is operated by a pneumatic control located inside the movement carriage, so allowing control of the opening and closing phases. SACMI Opera is roll fed labeling machine with two roll stations and hot glue system. Atlanta shrink wrapper is a single roll machine which means there are no reciprocating sealing bars to maintain. The continuous motion of the process allows higher speeds to be attained without disruption to the product during the wrapping sequence. The line has an electric heated thermal shrink tunnel in the end.

Main Equipment
• Blow molding machine SIPA EAS4 - 120 with 4 cavities and molds for 1.0 and 1.5 liter PET bottles, perform feeding system with container tipper and cooling water chiller Eurochiller Rosso 50 kW. Blower serial number S0 458
• PET Air Compressor Ateliers Francois CE24B, 10 m3/min, 40 bar, serial number 20D145
• Air conveyor system from blow molder to filler, approx 35 meters
• Mixer DRINK MIX-9, capacity 9000 l/h, year 2006 – almost unused but needs some parts
• Filler Triblock Berchi Isofill SP 32-32-6 with integrated product tank. Mechanical gravity filling, equipment with automated CIP nozzle system. AROL cap feeding system
• Labeling machine SACMI Opera 200, type 9TR SI EI with two label roll stations and hot glue system
• Shrink Wrapper Atlanta GAP 25, capacity 25 cycles / min, installed capacity 58 kW

Contact the Seller

For more information or to express interest in this machine,
please fill out this short enquiry form:

*First Name
*Company
*Country
*Telephone
Website
*Email
*Confirm Email
*Message

Product Description

PET Bottle Filling Line SIPA - Berchi 6000 bph - 1.0 and 1.5 liters

This line was installed in late 2006 and it is still running but available for immediate dismantling. All machinery is in very good working order, the line has capacity of 6000 bph in 1.0 and 1.5 liter PET bottles. (Also 2.5 liter molds are included, then capacity 3000 bph) Today it is used for beer but it can be used for still and other carbonated soft drinks as well. Blow molder is two-stage SIPA linear stretch blow-molding machine with fully electric brushless motors and it is working has a blowing-air recovery system. It is operated by a pneumatic control located inside the movement carriage, so allowing control of the opening and closing phases. SACMI Opera is roll fed labeling machine with two roll stations and hot glue system. Atlanta shrink wrapper is a single roll machine which means there are no reciprocating sealing bars to maintain. The continuous motion of the process allows higher speeds to be attained without disruption to the product during the wrapping sequence. The line has an electric heated thermal shrink tunnel in the end.

Main Equipment
• Blow molding machine SIPA EAS4 - 120 with 4 cavities and molds for 1.0 and 1.5 liter PET bottles, perform feeding system with container tipper and cooling water chiller Eurochiller Rosso 50 kW. Blower serial number S0 458
• PET Air Compressor Ateliers Francois CE24B, 10 m3/min, 40 bar, serial number 20D145
• Air conveyor system from blow molder to filler, approx 35 meters
• Mixer DRINK MIX-9, capacity 9000 l/h, year 2006 – almost unused but needs some parts
• Filler Triblock Berchi Isofill SP 32-32-6 with integrated product tank. Mechanical gravity filling, equipment with automated CIP nozzle system. AROL cap feeding system
• Labeling machine SACMI Opera 200, type 9TR SI EI with two label roll stations and hot glue system
• Shrink Wrapper Atlanta GAP 25, capacity 25 cycles / min, installed capacity 58 kW

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.