Contact Seller

Aseptic PET Line Procomac 18.000 bph, for still products

Year: 2004
Condition: Used
Located in Finland
Ref #: 116996

Product Description

Aseptic PET Line PROCOMAC 18.000 bph year 2004 

 

Line is still installed but not powered it was used for filling still water but it can be used for any still product: high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm. This was installed in 2004 and was in use till 2015 it is still today installed but not powered anymore.

 

Aseptic filling of still products

The product is fed from a sterile buffer tank located on top of the filling carrousel and pushed by an overpressure of sterile nitrogen gas, through a linear product path. The flow meter determines the quantity of liquid according to the container and closes a membrane valve when the pre-set quantity is reached; a dual-speed design (slow speed mode is used at beginning and end of filling cycle) avoids foaming even with critical products.

 

The flow meter is the only moving part in contact with the product and the filling process does not allow contact between the filling nozzle and the bottle to avoid cross contamination. FX fillers are sterilized internally using steam to guarantee optimal hygiene.

 

The bottle ‘neck handling’ system allows handling of any container with the same neck finish. Changeover is performed without compromising sterility. CIP cup insertion and extraction for closed-loop CIP and SIP is completely automatic. Automatic product changeover can be achieved in less than 30 minutes with minimal product scraps.

 

Line Characteristics:

 

Made by                  GEA Procomac

Made in year           2004

Capacity:                 8.000 bph @ 0.5 lt; 12.000 bph @ 1.5 lt; 9.000 bph @ 2.0 lt

Neck finish:            ?

Products:                Any still any still product: high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm

Availability:            Immediately available       

 

List of equipment:              

Procomac                      Uniclean 3A year 2004

Procomac                      Uniclean 3A year 2004

Procomac                      Unisolve VE BS year 2004

Procomac                      Unimix CM CM2 30 year 2004

APV                              Pasteurizer APV Invensys 1129 year 2003 24000 L/h

APV                              Homogenizer Rannie 90-76.115 year 2003 18000 L/h

APV                              Homogenizer Rannie 55-60.95 year 2004 8000 L/h

Procomac                      Bottle Conveyor year 2004

Procomac                      Convair 2000 year 2004

AGR                             AGR Camera year 2009

SIPA                             Blower SFR 16 E year 2004, cap 22000 bph

Procomac                      Mechanical Cap Feeder, year 2003

Procomac                      Sterilcap 3W, year 2006

Procomac                      Unidox, year 2004

Procomac                      Unitherm HS 20, year 2004

Procomac                      Uniflux year 2004

Procomac                      Aseptic Filler Fillstar CX 70.20.113, year 2004

Arol                               Aseptic Capper EUR PK Elespectic year 2004, cap 18000 bph

Heuft                            Bottle Inspector Spectrum TX, year 2004

Fuji                                Sleever year 2004 22000 bph

Sacmi                            Labeller Opera 200 RF 15T/R year 2004, cap 19800 bph

Procomac                      Divider BMCA year 2004

Dimac                           Packer Star 60 year 2004 43200 bph

Twinpack                      Handle Applicator MDE year 2004

Contact the Seller

For more information or to express interest in this machine,
please fill out this short enquiry form:

*First Name
*Company
*Country
*Telephone
Website
*Email
*Confirm Email
*Message

Product Description

Aseptic PET Line PROCOMAC 18.000 bph year 2004 

 

Line is still installed but not powered it was used for filling still water but it can be used for any still product: high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm. This was installed in 2004 and was in use till 2015 it is still today installed but not powered anymore.

 

Aseptic filling of still products

The product is fed from a sterile buffer tank located on top of the filling carrousel and pushed by an overpressure of sterile nitrogen gas, through a linear product path. The flow meter determines the quantity of liquid according to the container and closes a membrane valve when the pre-set quantity is reached; a dual-speed design (slow speed mode is used at beginning and end of filling cycle) avoids foaming even with critical products.

 

The flow meter is the only moving part in contact with the product and the filling process does not allow contact between the filling nozzle and the bottle to avoid cross contamination. FX fillers are sterilized internally using steam to guarantee optimal hygiene.

 

The bottle ‘neck handling’ system allows handling of any container with the same neck finish. Changeover is performed without compromising sterility. CIP cup insertion and extraction for closed-loop CIP and SIP is completely automatic. Automatic product changeover can be achieved in less than 30 minutes with minimal product scraps.

 

Line Characteristics:

 

Made by                  GEA Procomac

Made in year           2004

Capacity:                 8.000 bph @ 0.5 lt; 12.000 bph @ 1.5 lt; 9.000 bph @ 2.0 lt

Neck finish:            ?

Products:                Any still any still product: high acid, low acid, clear, viscous and those with pulps, fibers and pieces with dimensions up to 6x6x6 mm

Availability:            Immediately available       

 

List of equipment:              

Procomac                      Uniclean 3A year 2004

Procomac                      Uniclean 3A year 2004

Procomac                      Unisolve VE BS year 2004

Procomac                      Unimix CM CM2 30 year 2004

APV                              Pasteurizer APV Invensys 1129 year 2003 24000 L/h

APV                              Homogenizer Rannie 90-76.115 year 2003 18000 L/h

APV                              Homogenizer Rannie 55-60.95 year 2004 8000 L/h

Procomac                      Bottle Conveyor year 2004

Procomac                      Convair 2000 year 2004

AGR                             AGR Camera year 2009

SIPA                             Blower SFR 16 E year 2004, cap 22000 bph

Procomac                      Mechanical Cap Feeder, year 2003

Procomac                      Sterilcap 3W, year 2006

Procomac                      Unidox, year 2004

Procomac                      Unitherm HS 20, year 2004

Procomac                      Uniflux year 2004

Procomac                      Aseptic Filler Fillstar CX 70.20.113, year 2004

Arol                               Aseptic Capper EUR PK Elespectic year 2004, cap 18000 bph

Heuft                            Bottle Inspector Spectrum TX, year 2004

Fuji                                Sleever year 2004 22000 bph

Sacmi                            Labeller Opera 200 RF 15T/R year 2004, cap 19800 bph

Procomac                      Divider BMCA year 2004

Dimac                           Packer Star 60 year 2004 43200 bph

Twinpack                      Handle Applicator MDE year 2004

Most Popular Searches

Important Note to Genuine Buyers!

To help in the fight against internet scammers...
If you are a genuine buyer, please add as much detail to your enquiry as possible. Full company name, full company email address (i.e. not Yahoo, Hotmail or Gmail), website and company telephone numbers will help ensure that your message is treated as a genuine enquiry!

Thank you for your understanding!

Other Info

Sell Your Machine

Why Advertising with IM is the Best Choice for You.

Latest Deals

Register to Receive Details on the Latest Machines Listed.